I-DEMAXI ye-Adhesive Stone
Ukuqulunqwa okuPhambili
1. Unsaturated Polyester Resin
2. Iperoxide
3. Ukuzalisa
Imibala:Okucacileyo, okumhlophe, beige kunye nomnyama.
Ukupakisha Specification
| Umzekelo | 0.8L*12 | 4L*4 | 18L*1 |
Isicelo
Ubunjineli obuphezulu bomhlobiso kunye nokulungiswa kwamatye: isetyenziswa ngokubanzi kwilitye lokwakha, i-ceramics, ukusetyenzwa kwamatye e-deluxe, ukubeka ngokukhawuleza iithayile ze-vitrified, i-parquet, ukulungiswa kunye nokudibanisa.
Umyalelo
1. Umphezulu oza kudityaniswa kufuneka ucoceke, wome, kwaye ube rhabaxa kancinci.
2. Thatha iglue efunekayo kunye ne-hardener (umlinganiselo ngu-100: 2).Kwaye udibanise ngokulinganayo amacandelo amabini, uze uwasasaze ngexesha elifanelekileyo kunye ne-scraper phezu kwamatye.
Ixesha lokuphumla
| Iqondo lobushushu(℃） | Ixesha eliSebenzayo(umzuzu) | Ixesha leGel(min) | Gqibezela uNyango(Iyure) |
| 0~10 | 9 | 10 | 12 |
| 10-20 | 5 | 7 | 8 |
| 20-30 | 3 | 5 | 6 |
| 30-40 | 2 | 3 | 4 |
Iimpawu
InxalenyeA
| Uhlobo lwe-resin | Intlaka yepolyester engafakwanga | |||
| Umba | Intlama ecacileyo | Ityheli kancinci | Intlama enemibala | Umbala ohambayo |
| Ukuxinana | 1.05-1.15g/cm3 | 1.05-1.15g/cm3 | 1.5-1.7g/cm3 | 1.4-1.6g/cm3 |
| Viscosity(25℃) | 100,000-300,000CP | 700-900C.P | 350,000-800,000CP | 4,000-8,000CP |
| Ukubola okuyingozi | Ngokuqhelekileyo akukho nanye | |||
| Ukukhutshwa kwenkunkuma | Ngokwemithetho kazwelonke neyengingqi okanye imimiselo | |||
Icandelo B
| Icandelo eliphambili | Peroxide yendalo |
| Umba | Intlama emhlophe icolloid |
| Ukuxinana | 1.12-1.18g/cm3 |
| Viscosity(25℃) | 100,000-200,000CP |
| Ukubola okuyingozi | Ngokuqhelekileyo akukho nanye |
| Ukukhutshwa kwenkunkuma | Ngokwemithetho kazwelonke neyengingqi okanye imimiselo |
Ingqalelo
1. Musa ukubuyisela iglue edibeneyo kwi-can yasekuqaleni.
2. Yongeza ngaphezulu okanye ngaphantsi kokuqina kwi-adhesive ukwenza ixesha lokunyanga libe lifutshane okanye lide.
Kodwa ukusetyenziswa ngokugqithisileyo kwe-hardener (> 3%) kunokubangela ukuba umbala weglue utshintshe;ukusetyenziswa ngaphantsi kwe-hardener (<1%) kunokukhokelela ekunciphiseni amandla okudibanisa.
3. Igcinwe kwindawo eyomileyo nenomthunzi kwaye gcina isiciko sivalwe ngokuqinileyo emva kokusebenzisa.
4. Iinyanga ezili-12 zeshelufu (zigcine kude nobushushu, ukufuma nokukhanya kwelanga).
5. Musa ukwenza iindawo eziboshiweyo zibonakaliswe kwindawo emanzi kunye neqhwa.
6. Coca izixhobo ngokukhawuleza nge-solvent ekhethekileyo emva kokusetyenziswa.
7. Ukomisa ukuxhoma kunye nokulungisa ukulungiswa, nceda usebenzise i-miaojie epoxy AB Adhesive.
8. Gcina kude nomlilo xa usebenza.Kucetyiswa ukuba unxibe iiglavu kunye nezibuko zokukhusela.
Umboniso weMveliso
